3 mm or 1/8″ Diamond Drill Bit – Solid Core

(1 customer review)


Drill 3 mm or 1/8″ holes in glass easily. Will fit in a Dremel, solid core. Diamond Drill Bits must be kept wet while drilling.

Out of stock

SKU: 3 mm or 1/8" Diamond Solid Drill Bit Category:


This diamond-impregnated core-style drill bit features superior long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit is a full 360-degrees around the the bit. Slots on the side of the bit allow the removal of glass dust from inside the bit. These bits can be used on glass, ceramic wall tile, glass block, glass bottles, and jewelry.

  • Drill holes in both flat and contoured glass
  • Diamond-impregnated cutting bit for long life
  • Slots on the side of the bit allow the removal of material
  • Ideal for decorative projects including glass blocks or glass bottles

The diameter listed is the size of the hole drilled. However, it is somewhat nominal due to the fact that the diamond grit is plated on the bit. Sometimes the layer is slightly thicker, as it wears, the size gets slightly smaller. Drilling technique can also be a factor, since you are really grinding, not drilling. Final hole size could vary perhaps + or – 1-1.5 mm overall with all the factors considered.

Additional information

Weight 1 lbs
Dimensions 5 × 3 × 1 in

1 review for 3 mm or 1/8″ Diamond Drill Bit – Solid Core

  1. GlassWench Studio

    was very happy with these. I used them with a Dremel drill press and was able to make many many holes before the bit stopped being efficient. definitely use under water to facilitate the efficacy.

Add a review

Your email address will not be published. Required fields are marked *

You may also like…