Description
General Information For Molds with Posts:
- When preparing the mold with glass separator, make sure to cover every angle, especially if using a spray-on product
- If using a liquid separator such as kiln wash, make sure to give it ample time to dry before adding any frit
- If using frit, make sure the top of the post is uncovered before firing by brushing away excess glass
- When de-molding, wait until the mold is completely cool, then invert over a soft surface and gently thump it on the back if necessary
- Never try to pry the glass loose, as this may cause the post to break off
|
 |
|
|
LF105 Holey Shamrock
Mold Size: 3.5″ L x 3.25″ W x 1.75″ T
Cavity Size: 2.75″ L x 2.75″ W
Fill Weight: 42 grams
Please click here for a general tutorial on Frit Casting and Holey molds.
Please see second photo for important information on Holey molds.
Refer to the table below for a suggested Full Fuse schedule for COE96 glass:
| Segment |
Rate |
Temp (F) |
Hold |
| 1 |
300 |
1150 |
45 |
| 2 |
150 |
1300 |
20 |
| 3 |
400 |
1460 |
10 |
| 4 |
9999 |
950* |
60 |
*If using COE90, adjust this temperature to 900
Refer to the table below for a suggested Tack Fire schedule for COE96 glass:
(If fusing to a Tack Fire, we recommend using Powder and Fine frit, and filling uniformly 1/4″ full)
| Segment |
Rate |
Temp (F) |
Hold |
| 1 |
300 |
1150 |
45 |
| 2 |
150 |
1300 |
20 |
| 3 |
400 |
1410 |
10 |
| 4 |
9999 |
950* |
60 |
*If using COE90, adjust this temperature to 900 |
|
|
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.