Sale!

LF 6 – NatureScape Leaf Molds

(8 customer reviews)

$15.99

This mold measures approximately 5″ x 2 7/8″.

Out of stock

SKU: LF 6 NatureScape Category:

Description

NatureScape MOLDS can help you create stand alone leaves or placed in the center of your glass for an impressive design feature. They are very durable metal molds and will hold up to multiple firings. They can withstand rapid kiln temperature changes without mold damage. If glass happens to stick to the mold, it can be refreshed by sandblasting the glass remains off. Uncoated sides of the mold will darken after firing, this is normal. After firing, you may notice mold texture on your glass leaves, which adds character. You can also double stack your glass and molds to make more leaves at a time. You may need to adjust your firing schedule slightly. It may be necessary to lower the temperature or shorten your hold time to prevent thinning in spots. Thinning is more likely to happen on the heavier molds (LF6, 8, & 9)

Coat the NatureScape Mold with an aerosol Boron Nitride, such as ZYP or Mo-Re.

NOTE:  While not recommended, ZYP in the Brushable or Pump Spray form in a plastic bottle can be used only if the molds are preheated to about 225 degrees and applied while the molds are still hot. Unlike the aerosol form, Pump Spray and Brushable  ZYP are water based formulas and will cause rust on the molds if not applied to preheated molds. If rust appears, molds can be cleaned with a wire brush or sandblasted.

DO NOT USE Slide Spray or Lower Friction brand Boron Nitride Spray because for this application, they don’t work well. Water based mold release products, such as Primo Primer can be used on the molds only if you preheat the mold to about 225 degrees. Apply the primer while the molds are hot to get a good bond.

You can also use the backside of the molds for frit mold casting and create different colors of leaves with frit.

Firing Schedule
800 /hour 950 hold 10 minutes
AFAP 1340 30 minutes

Make adjustments to the recommended firing schedule to match your kiln setup and preferences. If you have issues with the mold release sticking to your glass, try firing to a lower temperature.

Looking for more information on NatureScape Molds ?

Need some addition inspiration check out our Fusible Glass Leaf Molds and Videos problem solver article.

Additional information

Weight 4 lbs
Dimensions 6 × 7 × 7 in

8 reviews for LF 6 – NatureScape Leaf Molds

  1. Heather Reeves (verified owner)

    I love these molds. I think I have all of them!!there super fun and they look great. Hope your making new molds in future. Heather

  2. Mary Mathews (verified owner)

    Love these, so simple to use

  3. Carol Kramer (verified owner)

    I’ ve been making fused glass flower stakes, flowers about 6-10″. I have made these large flowers and fused in a wire to attach, and it works perfectly!

  4. Nancy (verified owner)

    Package arrived quickly and in great shape. Can’t wait to use these molds.

  5. Shirley Van Dyken (verified owner)

    Love them

  6. Shirley Van Dyken (verified owner)

    The molds are phenomenal. They are awesome . I bought a few so I could fire a lot at once. The customer service is the best !!!! Thanks for all the help also. Shirley Van Dyken

    • Marilyn Trebacz

      Thanks Shirley and have fun!

  7. Anne (verified owner)

    Fabulous molds. Looking forward to trying them.

    • Marilyn Trebacz

      Have fun!

  8. Caren (verified owner)

    Tried them last night ,just put powder on them, love the out come. Will have fun with these. Very happy.
    Caren

    • Marilyn Trebacz

      Great-can’t wait to see pictures of the projects done with the NatureScape molds!

Add a review

Your email address will not be published. Required fields are marked *

You may also like…